Revision › Pressure in fluids › Worksheet
Pressure in fluids Medium
GCSE Physics · Forces · Name ____________________ Date ________
Builds on: Gas pressure
Do now
Quick questions on earlier topics - to get your brain going.
What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]
During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]
- D) Add salt to increase density
- C) Use a thermometer to measure temperature during measurement
- B) Record the water level before and after submerging the object
- A) Weigh the object inside the water
A container of gas has a volume of 0.10 m³ and is at a pressure of 80 kPa. The temperature is kept constant while the pressure increases to 160 kPa. What is the new volume of the gas? Provide your answer in m³. [1]
Air occupies a fixed volume of 0.02 m³ at a pressure of 100 kPa. If the temperature is kept constant and the pressure is raised to 250 kPa, what will the new volume be? Give your answer in m³. [1]
Practice
Which of the following is a necessary safety precaution when measuring atmospheric pressure with a barometer? [1]
- Use a high‑altitude environment for accuracy.
- Avoid calibrating it regularly.
- Keep the barometer in direct sunlight.
- Ensure the barometer has no air leaks.
A fluid exerts a force of 80 N over an area of 0.5 m². Calculate the pressure on the surface. Give your answer to the nearest Pa. [1]
Which of these statements correctly compares atmospheric pressure at sea level and at 10 000 m altitude? [1]
- Pressure increases with altitude due to higher temperature.
- Pressure is higher at 10 000 m because air molecules are denser.
- Pressure is lower at 10 000 m because there is less air above the surface.
- Pressure is the same at both heights because gravity pulls the same weight of air.
Which of the following statements is a common misconception about pressure applied by footwear? [1]
- Wearing high‑heeled shoes increases pressure on the ground because they concentrate force on a smaller area.
- A person walking barefoot can feel more pain stepping on a stone compared with standing in high heels, because the force is distributed over a large area.
- The pressure applied by a person in flats is higher than when wearing snow boots, because snow boots have a larger surface area.
- When a person steps on another's foot wearing flat shoes, the pressure transmitted to that foot is lower than when they step while wearing high‑heels.
An airbag inflates the seat of a car providing an upward pressure of 250 kPa over an area of 0.3 m² on the passenger's back. Calculate the upward force exerted by the airbag. Give your answer to the nearest newton. [1]
Which of the following statements is correct regarding how pressure varies with depth in a fluid? [1]
- Pressure decreases linearly with depth because there is less fluid above.
- Pressure only depends on temperature, not on depth.
- Pressure increases linearly with depth because the weight of the liquid column increases.
- Pressure remains constant at all depths because the fluid exerts equal force in all directions.
A hand pump exerts a normal force of \(120\,\text{N}\) over an area of \(0.6\,\text{m}^2\). What is the pressure on the surface? Give your answer in pascals to the nearest integer. [1]
Atmospheric pressure results from collisions of what particles? [1]
The upward force on a submerged object is called what? [1]
The water column exerts a pressure of \(150,000\text{ Pa}\). The density of water is \(1000\,\text{kg/m}^3\) and the gravitational field strength is \(9.8\,\text{N/kg}\). Find the height of the water column in metres, to one decimal place. [1]
A container holds a liquid with density \(1200\,\text{kg/m}^3\). The liquid is poured until its surface is \(2\,\text{m}\) above the bottom. What is the pressure at the bottom of the container? Give your answer in pascals. [1]
Stretch
A step up - try these if you finish.
Which footwear will exert a greater pressure on the ground per unit area? A Snowshoes with an area of 0.5 m². B High‑heeled shoes with an area of 0.05 m². C Bare feet with an area of 0.1 m². D All footwear exert the same pressure if weight is equal. [1]
- D
- C
- B
- A
Which statement correctly describes how pressure changes with depth in a liquid? A The pressure at the bottom of a water column is independent of its height. B The pressure increases with the height of the fluid column. C Pressure depends only on density, not on height. D Increasing the gravitational field strength has no effect on pressure. [1]
- D
- A
- B
- C
When measuring pressure inside a sealed container with a pressure gauge, which of the following is essential? A The gauge must be calibrated in atmospheres. B The gauge should not exceed the expected maximum pressure. C The gauge can be inserted at any time. D The gauge is only accurate if placed at the top. [1]
- B
- C
- A
- D
A fluid exerts a force of 120 N over an area of 3 m². What is the pressure on the surface? [1]
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which of the following best describes latent heat? A. Energy stored as potential energy only. B. Energy required for a change of state at constant temperature. C. Energy released when a substance freezes. D. Energy needed to increase the mass of a substance. [1]
- A
- D
- C
- B
The density of copper is 8.96 g/cm³. What is the mass of a 50‑cm³ sample? [1]
(Density and changes of state)Which piece of equipment is essential when measuring the volume of an irregular solid by water displacement? [1]
- c) Displacement can with a narrow spout
- a) Vernier caliper
- d) Analytical balance
- b) Beaker
A scientist fills a rigid metal tank with air at a pressure of 160 kPa and temperature of 20°C. The temperature is then increased to 60°C while the volume remains unchanged. Assuming ideal behaviour, what will be the new pressure in kPa (rounded to the nearest integer)? [1]
(Gas pressure)The specific latent heat of fusion of ice is 334 kJ kg⁻¹. How many kilograms of ice melt when 1000 kJ of energy is supplied? Give your answer to one decimal place. [1]
(Internal energy and latent heat)A sealed syringe initially contains gas at a pressure of 150 kPa and volume of 0.4 m³. If the pressure is increased to 300 kPa, what will be the new volume? Give your answer in litres rounded to the nearest litre. [1]
(Gas pressure)
Still going? Unlimited questions on pressure in fluids, marked as you go: 4triangles.co.uk
💼 Where it leads: Plumber · Baker · Heating and ventilation engineer · Commercial diver - more
Stuck, or finished? Scan for help on pressure in fluids - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 4
- C B) Record the water level before and after submerging the object
- 0.05
- 0.008
- D Ensure the barometer has no air leaks.
- 160
- C Pressure is lower at 10 000 m because there is less air above the surface.
- B A person walking barefoot can feel more pain stepping on a stone compared with standing in high heels, because the force is distributed over a large area.
- 75000
- C Pressure increases linearly with depth because the weight of the liquid column increases.
- 200
p = F/A = 120/0.6 = 200 Pa - air molecules
- upthrust
- 15.3
h = p/(ρg) = 150000/(1000×9.8) = 15.306... ≈ 15.3 m - 23520
p = hρg = 2×1200×9.8 = 23520 Pa - C B
- C B
- A B
- 40
- D B
- 448
- A c) Displacement can with a narrow spout
- 182
- 3
- 200
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on pressure in fluids - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk