Revision › Series and parallel circuits › Worksheet

Series and parallel circuits Easy

GCSE Physics · Electricity · Name ____________________ Date ________

Builds on: Static electricity

Do now

Quick questions on earlier topics - to get your brain going.

  1. A spark transfers energy of 0.12 J and moves a charge of 4 µC from one object to another. What is the potential difference between the two objects? (Give your answer in volts, rounded to the nearest whole number). [1]

  2. Which of the following statements about elementary particles is correct? [1]

    1. Electrons are positively charged and protons are negatively charged.
    2. Both electrons and protons are neutrally charged.
    3. Neutrons carry a positive charge while protons are neutral.
    4. Protons have a positive charge, electrons have a negative charge, and neutrons are neutral.
  3. A battery supplies 12 V. A resistor of unknown resistance is connected, producing a current of 0.4 A. Calculate the resistance using V = IR. [1]

  4. Which step should you do before measuring the resistance of a component with an ohmmeter? [1]

    1. ☐ Connect one lead across the component's terminals only
    2. ☐ Place the component in the circuit to maintain its temperature
    3. ☐ Heat the component to 100 °C
    4. ☐ Remove the component from any power supply and ensure it is disconnected from other circuits

Practice

  1. In a series circuit, what quantity is the same through every component? [1]

  2. Tick one box: Which statement about a series circuit is correct? [1]

    1. A) The total resistance equals the product of the resistances.
    2. B) The same current flows through every component.
    3. C) Each resistor has a different voltage drop regardless of size.
    4. D) The power supply's potential difference is divided equally among all components.
  3. What formula gives the equivalent resistance of two resistors joined in series? [1]

  4. Tick one box: Which statement reflects a common misconception about parallel circuits? [1]

    1. D) The total current equals the sum of currents through individual resistors.
    2. C) Adding a resistor in parallel increases the overall resistance.
    3. B) The voltage across each resistor is different.
    4. A) The current through each resistor is the same.
  5. Tick one box: Which of the following circuits has a lower total resistance? [1]

    1. B) A parallel circuit made from equal resistors.
    2. A) A series circuit made from equal resistors.
    3. D) None of the above.
    4. C) Both have the same total resistance.
  6. A 9‑volt battery is connected to two lightbulbs in series with resistances of 12 Ω and 24 Ω respectively. What is the potential difference across the 24 Ω bulb? [1]

  7. In a series circuit two resistors of 4 Ω and 6 Ω are connected to the same battery. What is the total resistance? [1]

  8. A resistor of 200 Ω is connected to a 12‑volt supply. What is the current in milliamps? [1]

Stretch

A step up - try these if you finish.

  1. Adding a second resistor in series to an existing circuit will _______. [1]

    1. C) decrease the total current from the battery
    2. D) double the resistance of each individual resistor
    3. A) increase the total current from the battery
    4. B) leave the voltage across each component unchanged
  2. In a series circuit the current is _______. [1]

    1. D) unpredictable
    2. C) zero across all components
    3. B) greater in components with higher resistance
    4. A) the same through each component
  3. A 12 V battery is connected to two resistors in series, R₁ = 4 Ω and R₂ = 6 Ω. Using the key equation for total resistance and Ohm’s law, calculate the current flowing through the circuit, expressed in milliamperes (mA) rounded to the nearest whole number. [1]

  4. Two resistors of 9 Ω and x Ω are connected in series to an 18 V battery. If the total resistance of the circuit is 15 Ω, calculate the current flowing through the circuit in amperes (A) rounded to two decimal places. [1]

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. When measuring the voltage across a resistor with a multimeter, which setting should you use? [1]

    1. C) ACV 1000 V
    2. D) Continuity test
    3. B) DCV 200 V
    4. A) Auto‑range
    (Power and the National Grid)
  2. A microwave consumes 1.2 kW and is used for 5 minutes each day for a week. How much energy, in joules, does it use in total? (Hint: 1 kW = 1000 W). [1]

    (Mains electricity and safety)
  3. An electric heater uses 4 kW of power from mains. Calculate the current it draws (in A). Round to one decimal place. [1]

    (Mains electricity and safety)
  4. When measuring the resistance of a component with a multimeter, which precaution should you take? [1]

    1. Keep the device on while measuring to keep it warm.
    2. Touch both leads simultaneously for better contact.
    3. Disconnect the power supply before connecting the meter.
    4. Use the highest voltage setting on the meter.
    (Current, potential difference and resistance)
  5. What is the force experienced by two objects with identical charges? [1]

    (Static electricity)
  6. If a constant voltage supply is used and the resistance in a circuit increases, what happens to the power consumed by the load? [1]

    1. A) Power increases
    2. B) Power stays the same
    3. C) Power decreases
    4. D) Power first increases then decreases
    (Power and the National Grid)

💼 Where it leads: Smart meter installer · Electricity distribution worker · Electrician · Auto electrician - more

Stuck, or finished? Scan for help on series and parallel circuits - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 30000
  2. D Protons have a positive charge, electrons have a negative charge, and neutrons are neutral.
  3. 30
  4. D ☐ Remove the component from any power supply and ensure it is disconnected from other circuits
  5. current
  6. B B) The same current flows through every component.
  7. R₁+R₂
  8. B C) Adding a resistor in parallel increases the overall resistance.
  9. A B) A parallel circuit made from equal resistors.
  10. 6
  11. 10
  12. 60
  13. A C) decrease the total current from the battery
  14. D A) the same through each component
  15. 1200
  16. 1.2
  17. C B) DCV 200 V
  18. 2520000
  19. 17.4
  20. C Disconnect the power supply before connecting the meter.
  21. Repulsion
  22. C C) Power decreases

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on series and parallel circuits - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk