Revision › Series and parallel circuits › Worksheet
Series and parallel circuits Medium
GCSE Physics · Electricity · Name ____________________ Date ________
Builds on: Static electricity
Do now
Quick questions on earlier topics - to get your brain going.
A spark transfers energy of 0.12 J and moves a charge of 4 µC from one object to another. What is the potential difference between the two objects? (Give your answer in volts, rounded to the nearest whole number). [1]
Which of the following statements about elementary particles is correct? [1]
- Electrons are positively charged and protons are negatively charged.
- Both electrons and protons are neutrally charged.
- Neutrons carry a positive charge while protons are neutral.
- Protons have a positive charge, electrons have a negative charge, and neutrons are neutral.
A battery supplies 12 V. A resistor of unknown resistance is connected, producing a current of 0.4 A. Calculate the resistance using V = IR. [1]
Which step should you do before measuring the resistance of a component with an ohmmeter? [1]
- ☐ Connect one lead across the component's terminals only
- ☐ Place the component in the circuit to maintain its temperature
- ☐ Heat the component to 100 °C
- ☐ Remove the component from any power supply and ensure it is disconnected from other circuits
Practice
Adding a second resistor in series to an existing circuit will _______. [1]
- C) decrease the total current from the battery
- D) double the resistance of each individual resistor
- A) increase the total current from the battery
- B) leave the voltage across each component unchanged
In a series circuit the current is _______. [1]
- D) unpredictable
- C) zero across all components
- B) greater in components with higher resistance
- A) the same through each component
A 12 V battery is connected to two resistors in series, R₁ = 4 Ω and R₂ = 6 Ω. Using the key equation for total resistance and Ohm’s law, calculate the current flowing through the circuit, expressed in milliamperes (mA) rounded to the nearest whole number. [1]
Two resistors of 9 Ω and x Ω are connected in series to an 18 V battery. If the total resistance of the circuit is 15 Ω, calculate the current flowing through the circuit in amperes (A) rounded to two decimal places. [1]
A 5 V LED is connected in series with a 200 Ω resistor. What is the current through the LED, expressed in milliamperes (mA) to the nearest whole number? [1]
Which of the following should be done before connecting a new component to an existing circuit? [1]
- D) Disconnect all components first
- A) Increase the supply voltage
- B) Turn off the power source
- C) Add more resistors in series
In a series circuit, what quantity is the same through every component? [1]
Tick one box: Which statement about a series circuit is correct? [1]
- A) The total resistance equals the product of the resistances.
- B) The same current flows through every component.
- C) Each resistor has a different voltage drop regardless of size.
- D) The power supply's potential difference is divided equally among all components.
What formula gives the equivalent resistance of two resistors joined in series? [1]
Tick one box: Which statement reflects a common misconception about parallel circuits? [1]
- D) The total current equals the sum of currents through individual resistors.
- C) Adding a resistor in parallel increases the overall resistance.
- B) The voltage across each resistor is different.
- A) The current through each resistor is the same.
Tick one box: Which of the following circuits has a lower total resistance? [1]
- B) A parallel circuit made from equal resistors.
- A) A series circuit made from equal resistors.
- D) None of the above.
- C) Both have the same total resistance.
A 9‑volt battery is connected to two lightbulbs in series with resistances of 12 Ω and 24 Ω respectively. What is the potential difference across the 24 Ω bulb? [1]
Stretch
A step up - try these if you finish.
For two resistors of 4 Ω and 6 Ω, which statement correctly compares their total resistance when wired in series versus in parallel? [2]
- a) The series arrangement gives a smaller total resistance than the parallel arrangement.
- b) The parallel arrangement gives a larger total resistance than the series arrangement.
- c) The total resistance is the same for both arrangements.
- d) The parallel arrangement gives a smaller total resistance than the series arrangement.
In a parallel circuit, which statement is incorrect? [2]
- D) The total resistance is less than each individual resistor.
- B) The potential difference across each branch is the same.
- C) Adding more resistors increases the total current.
- A) The current through each component is equal.
Which of the following statements correctly compares total resistance in series and parallel circuits? [2]
- C) Both configurations give the same total resistance if resistors are equal.
- D) The relationship depends on the number of components.
- A) Total resistance in series is always greater than that in parallel with the same resistors.
- B) Total resistance in parallel is always greater than that in series with the same resistors.
Which of the following is true for a series circuit? [2]
- D) The total voltage equals the sum of all currents.
- A) The potential difference across each resistor is the same.
- B) The total resistance equals the largest resistor.
- C) The current through each component is the same.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Tick one box. Which statement best describes an Ohmic conductor? [1]
- Its resistance decreases as temperature rises
- Its resistance remains constant for a given temperature and voltage
- Its resistance increases as current increases
- Its resistance remains constant regardless of temperature
A hair dryer draws a current of 4 A from the mains supply. Calculate its power consumption. Use \(P = V\times I\) where \(V = 230\,V\). [2]
(Mains electricity and safety)A small radio operates from a single‑cell battery that supplies 3 V and draws a current of 200 mA when it is turned on. What power (in watts) does the radio consume? Give your answer to one decimal place. [1]
(Power and the National Grid)Which component in a plug protects the appliance from over‑current? [1]
- Neutral wire
- Earth wire
- Live wire
- Fuse
In a series circuit powered by a \(9\,V\) battery, a \(100\,\Omega\) resistor and a light bulb of resistance \(200\,\Omega\) are connected in series. If the current through the circuit is \(30\,mA\), what is the potential difference across the light bulb? [1]
(Current, potential difference and resistance)A plastic rod is rubbed with a cotton cloth. Which of the following statements correctly explains what happens to the charges on the two objects? [1]
- Electrons are transferred from the rod to the cloth, so the rod becomes positively charged.
- Electrons are transferred from the cloth to the rod, making the rod negative.
- Both the rod and cloth become neutrally charged.
- The rod loses protons and becomes negatively charged.
Still going? Unlimited questions on series and parallel circuits, marked as you go: 4triangles.co.uk
💼 Where it leads: Smart meter installer · Electricity distribution worker · Electrician · Auto electrician - more
Stuck, or finished? Scan for help on series and parallel circuits - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 30000
- D Protons have a positive charge, electrons have a negative charge, and neutrons are neutral.
- 30
- D ☐ Remove the component from any power supply and ensure it is disconnected from other circuits
- A C) decrease the total current from the battery
- D A) the same through each component
- 1200
- 1.2
- 25
- C B) Turn off the power source
- current
- B B) The same current flows through every component.
- R₁+R₂
- B C) Adding a resistor in parallel increases the overall resistance.
- A B) A parallel circuit made from equal resistors.
- 6
- D d) The parallel arrangement gives a smaller total resistance than the series arrangement.
- D A) The current through each component is equal.
- C A) Total resistance in series is always greater than that in parallel with the same resistors.
- D C) The current through each component is the same.
- B Its resistance remains constant for a given temperature and voltage
- 920
- 0.6
- D Fuse
- 6
- B Electrons are transferred from the cloth to the rod, making the rod negative.
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on series and parallel circuits - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk