Learn how power, energy and the National Grid work in everyday life.
Key words
power
rate of energy use or production
energy
work that can be done, measured in joules
voltage
potential difference, volts (V)
Key points
Power equals voltage times current: \(P=VI\).
It can also be written as \(P=I^2R\).
Energy transferred is power multiplied by time: \(E=P t\).
The National Grid uses high voltage to lower current and reduce losses.
Watch out for
Higher rated power means more energy in less time.
Remember: A step‑up transformer raises voltage, a step‑down lowers it before domestic use.
Power and the National Grid Core
You will need to remember how power relates to voltage, current and resistance, how energy is transferred by appliances, and why electricity is carried at high voltage on the National Grid.
Key words
P
power in watts (W)
V
potential difference in volts (V)
I
current in amperes (A)
R
resistance in ohms (Ω)
Key points
Power is the rate at which energy is used or produced: P = V I
Because I = V/R, power can also be written as P = I^2 R
The energy transferred by a device over time t is E = P t
Alternatively, if you know the charge Q that has moved through a potential difference V then E = Q V
Electricity can be transmitted efficiently by using high voltage: for a given power P, higher V means lower current I (P = VI). Lower current reduces resistive losses I²R in cables.
Transformers change the voltage of an AC supply without changing its power (ideal case), so power stations use step‑up transformers to raise the voltage for transmission and consumers use step‑down transformers to lower it for domestic use.
Watch out for
Remember the unit conversions: 1 kWh = 3.6×10^6 J.
When dealing with transformers, use the relation V₁/V₂ = I₂/I₁ for an ideal transformer.
If you see a problem about reducing power loss on cables, calculate the current in each case using I = P / V and then find the loss by L = I² R.
Remember: You can explain to someone how using a high‑voltage transmission line reduces current for the same power and therefore lowers heat losses, making the National Grid efficient.
Power and the National Grid Stretch
A quick, clear guide to the key ideas you must know for GCSE physics, plus a typical exam‑style example solved step by step.
Key points
Power in any device is given by P=V×I; if resistance is known use P=I²R instead.
Energy transferred over time follows E=P t, so the longer a power‑rated appliance runs, the more energy it uses.
For an electric circuit work done on charge can be calculated as E=Q×V; this gives the same result as E=P t if Q and V are known.
High voltage transmission (step‑up) reduces current for a given power because P=VI, so I is lower when V is higher.
Lower current means much smaller I²R losses in the cables, making long‑distance delivery cheaper and safer.
Step‑down transformers lower the voltage again before domestic use; ideal transformers change voltage without changing power.
Watch out for
none
Remember: Always remember to write units in the correct form – watts (W), volts (V), amperes (A), ohms (Ω), joules (J) and kilowatt‑hours (kWh).
✏️ Try 3 quick questions
When measuring the voltage across a resistor with a multimeter, which setting should you use?
A small radio operates from a single‑cell battery that supplies 3 V and draws a current of 200 mA when it is turned on. What power (in watts) does the radio consume? Give your answer to one decimal place.
3. Which of the following statements about transformers is false? (Choose one)
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on power and the national grid, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.