Revision › GCSE Physics › Electricity

Power and the National Grid

GCSE Physics · Electricity. Explained 3 ways - start with the one that suits you.

Power and the National Grid Start here

Learn how power, energy and the National Grid work in everyday life.

Key words

power
rate of energy use or production
energy
work that can be done, measured in joules
voltage
potential difference, volts (V)

Key points

  • Power equals voltage times current: \(P=VI\).
  • It can also be written as \(P=I^2R\).
  • Energy transferred is power multiplied by time: \(E=P t\).
  • The National Grid uses high voltage to lower current and reduce losses.

Watch out for

  • Higher rated power means more energy in less time.

Remember: A step‑up transformer raises voltage, a step‑down lowers it before domestic use.

Power and the National Grid Core

You will need to remember how power relates to voltage, current and resistance, how energy is transferred by appliances, and why electricity is carried at high voltage on the National Grid.

Key words

P
power in watts (W)
V
potential difference in volts (V)
I
current in amperes (A)
R
resistance in ohms (Ω)

Key points

  • Power is the rate at which energy is used or produced: P = V I
  • Because I = V/R, power can also be written as P = I^2 R
  • The energy transferred by a device over time t is E = P t
  • Alternatively, if you know the charge Q that has moved through a potential difference V then E = Q V
  • Electricity can be transmitted efficiently by using high voltage: for a given power P, higher V means lower current I (P = VI). Lower current reduces resistive losses I²R in cables.
  • Transformers change the voltage of an AC supply without changing its power (ideal case), so power stations use step‑up transformers to raise the voltage for transmission and consumers use step‑down transformers to lower it for domestic use.

Watch out for

  • Remember the unit conversions: 1 kWh = 3.6×10^6 J.
  • When dealing with transformers, use the relation V₁/V₂ = I₂/I₁ for an ideal transformer.
  • If you see a problem about reducing power loss on cables, calculate the current in each case using I = P / V and then find the loss by L = I² R.

Remember: You can explain to someone how using a high‑voltage transmission line reduces current for the same power and therefore lowers heat losses, making the National Grid efficient.

Power and the National Grid Stretch

A quick, clear guide to the key ideas you must know for GCSE physics, plus a typical exam‑style example solved step by step.

Key points

  • Power in any device is given by P=V×I; if resistance is known use P=I²R instead.
  • Energy transferred over time follows E=P t, so the longer a power‑rated appliance runs, the more energy it uses.
  • For an electric circuit work done on charge can be calculated as E=Q×V; this gives the same result as E=P t if Q and V are known.
  • High voltage transmission (step‑up) reduces current for a given power because P=VI, so I is lower when V is higher.
  • Lower current means much smaller I²R losses in the cables, making long‑distance delivery cheaper and safer.
  • Step‑down transformers lower the voltage again before domestic use; ideal transformers change voltage without changing power.

Watch out for

  • none

Remember: Always remember to write units in the correct form – watts (W), volts (V), amperes (A), ohms (Ω), joules (J) and kilowatt‑hours (kWh).

✏️ Try 3 quick questions

  1. When measuring the voltage across a resistor with a multimeter, which setting should you use?

  2. A small radio operates from a single‑cell battery that supplies 3 V and draws a current of 200 mA when it is turned on. What power (in watts) does the radio consume? Give your answer to one decimal place.

  3. 3. Which of the following statements about transformers is false? (Choose one)

Practise it with real exam questions

4 Triangles has quick questions on power and the national grid, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.

Try the quick questions

📝 Worksheets and a knowledge organiser to print

Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.

Easy Medium Hard 📄 Knowledge organiser

🔤 Key words to know

Power
the amount of energy transferred each second.
Coulombs (C)
the unit of electric charge.
Electric current
an electrical property; it can either be positive or negative.
Potential difference (p.d.)
the amount of energy transferred by each coulomb of charge, passing between two points in a circuit.
Electric charge
an electrical property; it can either be positive or negative.
Van de Graaff generator
A device that produces electric charge and is used in electrostatic experiments.
Charge
An electrical property; it can either be positive or negative.
Electric field
The invisible field around a charged object that causes another charged object to experience a force.
Coulomb
The unit of electric charge.
Ampere
The unit of electric current.

Many definitions from Oak National Academy (Open Government Licence).

When it's usually taught: Year 11 - Mains electricity.

💼 Where it could take you

Jobs where people use this every day - whichever way you go after school.

Straight from school or an apprenticeship

With college or an advanced apprenticeship

With a degree

Each job opens its National Careers Service profile: what it pays, the hours, and how to get in.

📺 Watch a lesson on this

Each is a science lesson by Oak National Academy licensed under Open Government Licence (OGL). Lessons open on Oak National Academy's site.

More on Electricity